Akční produkty:
Rádi Vám poradíme
Úvod » Fotovoltaika » Střídače » VICTRON Multiplus 48V/5000VA/70A-100A
VICTRON Multiplus 48V/5000VA/70A-100A
Kompletní specifikace
Victron Energy MultiPlus DC-AC 48V 5000VA 70A - 100A. hybridní střídač ( střídač + nabíječka), skutečná sinusoida
Product description
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
PowerControl - Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist - Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
Komentáře
NÁZORY A DOTAZY NÁVŠTĚVNÍKŮ
| Nebyl zatím přidán žádný názor. Přidejte svůj názor nebo dotaz jako první. |
"nejvíc frčí"
O nás
Společnost INTV, spol. s r.o. působí na trhu od roku 1992. Je jedním z největších poskytovatelů služeb elektronických komunikací s využitím satelitní technologie.
Od roku 2008 je největším poskytovatelem služeb připojení k síti internet přes satelit, a to službami TooWay, Konnect a v neposlední řadě i Starlink.
Od roku 2022 společnost rozšířila své portfolio služeb do oblasti výstavby, provozu a servisu malých fotovoltaických elektráren.
Personál společnosti je vyškolen k instalaci, zprovoznění i managementu fotovoltaických systémů.
Vytvořeno systémem www.webareal.cz
